Autor Thema: ICARUS: Tracking und Reconstruction Tool  (Gelesen 12691 mal)

Offline Thomas W.

  • Mood Guru
  • *****
  • Beiträge: 1368
  • This is where I start to have fun...
    • Profil anzeigen
ICARUS: Tracking und Reconstruction Tool
« am: 10. Dezember 2002, 12:07:27 »
Da müssen mal wieder die Experten ran (vielleicht kann mir mal einer erklären, was genau ich mit dieser Software anstellen kann).
Hat auf jeden Fall etwas mit Videos zu tun.

ICARUS: Interactive Calibration and Reconstruction from Image Sequences

Homepage: http://aig.cs.man.ac.uk/icarus/index.php

Kommentar zur IRIX-Version:

SGI Irix 6.5 (IP32)
On SGI systems, you must have SGI's Digital Media libraries installed, and the TIFF library which is available from the SGI Freeware website. Your machine should have at least 256Mb of memory available, although we recommend 512Mb for optimal performance.

This software has only been tested on an SGI O2 and SGI Onyx2 running Irix 6.5.17m. If you have problems running the software on other SGI platforms, please send an email to icarus@aig.cs.man.ac.uk and let us know.

Downloading the software

Full distribution (v2.06, 34 Mbytes) http://aig.cs.man.ac.uk/icarus/icarus-2.06-irix-IP32.tar.gz


Contains the ICARUS Personal Edition executables, documentation, tutorial files, plus three IMS movie files required by the tutorials.

Installation

First unpack the distribution using gunzip and tar, and then follow the instructions in the INSTALL text file.
 

mood-indigo.org - Das unabhängige Silicon Graphics User Forum

ICARUS: Tracking und Reconstruction Tool
« am: 10. Dezember 2002, 12:07:27 »

Holger251

  • Gast
Re: ICARUS: Tracking und Reconstruction Tool
« Antwort #1 am: 10. Dezember 2002, 13:21:09 »
Klingt so als könne man damit aus einer Reihe von Bildern die Geometriedaten der abgebildeten Objekte wiederherstellen :-)

Holger251

  • Gast
Re: ICARUS: Tracking und Reconstruction Tool
« Antwort #2 am: 10. Dezember 2002, 13:33:24 »
Btw. auf meiner Octane SI spielt das Ding nicht mit mir.
Hat jemand eine Idee was das bedeuten könnte ?
[snip]
ICARUS v2.06 (reconstruction)
Personal Edition

pbuffer RED= 8
pbuffer GREEN= 8
pbuffer BLUE= 8
pbuffer ALPHA= 8
pbuffer DEPTH= 24
pbuffer DOUBLEBUFFER= 0
X Error: BadAlloc (insufficient resources for operation) 11
 Major opcode:  146
 Resource id:  0x0
X Error: BadMatch (invalid parameter attributes) 8
 Major opcode:  146
 Resource id:  0x4c00001
X Error: BadMatch (invalid parameter attributes) 8
 Major opcode:  146
 Resource id:  0x4c002a0
[snip]

rob_gester

  • Gast
Re: ICARUS: Tracking und Reconstruction Tool
« Antwort #3 am: 10. Dezember 2002, 14:00:35 »
hast du tiff-library installiert?
rob

Holger251

  • Gast
Re: ICARUS: Tracking und Reconstruction Tool
« Antwort #4 am: 10. Dezember 2002, 14:02:44 »
Ja :-) Freeware ist fast vollständig installiert...

rob_gester

  • Gast
Re: ICARUS: Tracking und Reconstruction Tool
« Antwort #5 am: 10. Dezember 2002, 14:03:07 »
ist das nicht sowas wie maya-live für object tracking und einbau der 3d-geometrien in die video-sequenzen?
rob

rob_gester

  • Gast
Re: ICARUS: Tracking und Reconstruction Tool
« Antwort #6 am: 10. Dezember 2002, 14:08:36 »
ich checke das am abend auf meiner octane se/512 mb. insufficient resources ??? was braucht das ding noch?
rob

Holger251

  • Gast
Re: ICARUS: Tracking und Reconstruction Tool
« Antwort #7 am: 10. Dezember 2002, 14:08:40 »
Ich glaube eher umgekehrt :-)

rob_gester

  • Gast
Re: ICARUS: Tracking und Reconstruction Tool
« Antwort #8 am: 10. Dezember 2002, 14:33:05 »
in der dokumentation ist von irix 6.5.13 auf o2 die rede. vielleicht ist diese digital media library version das minimum dafür ???
es ist ein tool für das geometrie-tracking und nicht für den einbau: also knappe hälfte von maya-live funktionalität, sozusagen.
rob

kudde

  • Gast
Re: ICARUS: Tracking und Reconstruction Tool
« Antwort #9 am: 10. Dezember 2002, 14:48:42 »
Ja das Tool ist ganz klar ein Camera Tracker bzw MatchMover, ähnlich wie 3dequalizer, boujou oder matchmover bzw das von rob_gester angesprochene MayaLive. Die Geometry Reconstruction Funktion ähnelt wohl ein wenig dem realviz imagemodeler.

Falls einer Links zu den oben angesprochenen Sachen sucht:
http://www.realviz.com
http://www.3dequalizer.com/   (deutsche Firma)
http://www.2d3.com

-Kudde-



Holger251

  • Gast
Re: ICARUS: Tracking und Reconstruction Tool
« Antwort #10 am: 10. Dezember 2002, 15:54:06 »
Das Problem Icarus/Octane ist bereits bekannt ...

Hello Holger,

We are aware of problems with the pbuffer allocation on Irix machines, and
have got Icarus working on O2 and IRE2 machines, but we don't have access to
any Octane machines to test with.

The problem is caused by the weird variety of pbuffer frame configurations
that Irix will accept. Not all supposedly "valid" configurations are actually
accepted by the machine, and those that are not cause this "insufficient
resources" error.

In order to work out why this is failing, we need to get a list of supported
frame-buffer configurations on the Octane. You can help us do this by
downloading a new irecon binary from: http://aig.cs.man.ac.uk/icarus/irecon

If you run this, it will fail as normal but also generate a file called
/tmp/fbconfigs.txt that lists the supported frame-buffer configurations on
your system. Can you please email this file to me?

Best wishes,

Simon

Offline Thomas W.

  • Mood Guru
  • *****
  • Beiträge: 1368
  • This is where I start to have fun...
    • Profil anzeigen
Re: ICARUS: Tracking und Reconstruction Tool
« Antwort #11 am: 10. Dezember 2002, 16:11:59 »
@ Holger251:

Was genau machst Du mit der Software???

Holger251

  • Gast
Re: ICARUS: Tracking und Reconstruction Tool
« Antwort #12 am: 10. Dezember 2002, 16:28:48 »
 ;D Zur Zeit versuch ich sie eigentlich nur ans Rennen zu bringen  ;D ;D ;D

rob_gester

  • Gast
Re: ICARUS: Tracking und Reconstruction Tool
« Antwort #13 am: 10. Dezember 2002, 17:05:02 »
um kanzler schröder zu tracken?  ;D
rob

Holger251

  • Gast
Re: ICARUS: Tracking und Reconstruction Tool
« Antwort #14 am: 10. Dezember 2002, 17:06:58 »
Hehe...zumindest das reconstruction modul dürfte ganz ordentlich zu tun haben bei dem zerklüfteten Gesicht *g*