Superuser

Autor Thema: 'Halbe' Origin 2000 mit so ziemlich allem, was reingeht, Fibre Channel Array  (Gelesen 4069 mal)

Pinky

  • Gast
Halbe Rack Origin (meldet sich als 'Onyx 2 MXI') mit
- 8 300Mhz R12Ks
- 16GB RAM
- Platten: 2x17GB, 1x9GB 2x73GB
- 2 Rack Router Boards
- DIVO (ohne DV Option)
- XIO 2x FC Karte, mit DB9 FC Ports und 2 MIAs auf Glasfaser (SC)
- XIO SCSI Karte mit einem Kabel, also 1 'normaler' und ein diff. SCSI Anschluss
- PCI Shoehorn
- PCI GB Ethernet
- PCI FC Karte QLogic QL2200 mit einem SC Port
- IO6G von einer Onyx (also Keyboard, Mouse, Audio, ...)
- SI Grafikkarte mit Adapter auf VGA
- Irix 6.5.24
- MipsPro 7.4.4m (letzte Version) C und F90 Compiler installiert, ohne Lizenz

Ahja, laeuft mit ganz normalen 240V.

Ausserdem gibt's das 'Origin 200 and Onyx2 Deskside and Rackmount Installation Instructions' (108-0155-004) Manual dazu - das ist _nicht_ auf Techpubs erhaeltlich, das verwendeten die SGI Techniker.

Kann auch noch ein CD-Laufwerk in externen Gehaeuse dazugeben.

Dazu passendes FC Array - Sun A5000 mit 14 73GB (1TB)  Platten mit 10K RPM, 4 SC Fibre Channel GBICs an der Backplane (ist gesplittet, also 7 Platten haengen an je 2 Ausgaengen)

Abholung in Lassnitzhoehe (15km von Graz entfernt) oder ich stelle die Origin selbst zu, dann aber nicht weiter als 1 Autostunde von Graz entfernt.

Preis 2000 EUR fuer die Origin, 750 fuer das Array 2500 EUR fuer alles.

Hinv (hinv -mv):
Location: /hw/module/3/slot/n1/node
        MODULEID Board: barcode K0018194   part              rev   
     IP31PIMM8MB Board: barcode JHL512     part 030-1401-002 rev  B
            IP31 Board: barcode JEF182     part 030-1255-003 rev  D
       8P12_MPLN Board: barcode FXZ928     part 030-0762-006 rev  K
Location: /hw/module/3/slot/n2/node
     IP31PIMM8MB Board: barcode JHC636     part 030-1401-002 rev  B
            IP31 Board: barcode JEK535     part 030-1255-003 rev  D
Location: /hw/module/3/slot/n3/node
     IP31PIMM8MB Board: barcode JED476     part 030-1401-002 rev  C
            IP31 Board: barcode JEE071     part 030-1255-003 rev  D
Location: /hw/module/3/slot/n4/node
            IP31 Board: barcode JHL400     part 030-1255-003 rev  D
     IP31PIMM8MB Board: barcode JEF438     part 030-1401-002 rev  B
Location: /hw/module/3/slot/r1/router
      ROUTER_IR1 Board: barcode HMA666     part 030-0841-003 rev  B
Location: /hw/module/3/slot/r2/router
      ROUTER_IR1 Board: barcode GBG648     part 030-0841-002 rev  H
Location: /hw/module/3/slot/io4/mgras
            GM10 Board: barcode ENF828     part 030-0938-003 rev  Y
Location: /hw/module/3/slot/io2/pci_xio
         PCI_XIO Board: barcode GBH935     part 030-1062-002 rev  D
Location: /hw/module/3/slot/io8/mscsi
           MSCSI Board: barcode FTH057     part 030-1243-001 rev  G
Location: /hw/module/3/slot/io7/fibre_channel
   FIBRE_CHANNEL Board: barcode JKY134     part 030-0927-003 rev  E
Location: /hw/module/3/slot/io1/baseio
          BASEIO Board: barcode GAM473     part 030-0734-002 rev  K
             MIO Board: barcode FZY507     part 030-0880-003 rev  F
Location: /hw/module/3/slot/io3/divo
            DIVO Board: barcode DPM493     part 030-1046-002 rev  G
8 300 MHZ IP27 Processors
CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 2.3
CPU 0 at Module 3/Slot 1/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
CPU 1 at Module 3/Slot 1/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
CPU 2 at Module 3/Slot 2/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
CPU 3 at Module 3/Slot 2/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
CPU 4 at Module 3/Slot 3/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
CPU 5 at Module 3/Slot 3/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
CPU 6 at Module 3/Slot 4/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
CPU 7 at Module 3/Slot 4/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
Main memory size: 16384 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 8 Mbytes
Memory at Module 3/Slot 1: 4096 MB (enabled)
  Bank 0 contains 512 MB (Standard) DIMMS (enabled)
  Bank 1 contains 512 MB (Standard) DIMMS (enabled)
  Bank 2 contains 512 MB (Standard) DIMMS (enabled)
  Bank 3 contains 512 MB (Standard) DIMMS (enabled)
  Bank 4 contains 512 MB (Standard) DIMMS (enabled)
  Bank 5 contains 512 MB (Standard) DIMMS (enabled)
  Bank 6 contains 512 MB (Standard) DIMMS (enabled)
  Bank 7 contains 512 MB (Standard) DIMMS (enabled)
Memory at Module 3/Slot 2: 4096 MB (enabled)
  Bank 0 contains 512 MB (Standard) DIMMS (enabled)
  Bank 1 contains 512 MB (Standard) DIMMS (enabled)
  Bank 2 contains 512 MB (Standard) DIMMS (enabled)
  Bank 3 contains 512 MB (Standard) DIMMS (enabled)
  Bank 4 contains 512 MB (Standard) DIMMS (enabled)
  Bank 5 contains 512 MB (Standard) DIMMS (enabled)
  Bank 6 contains 512 MB (Standard) DIMMS (enabled)
  Bank 7 contains 512 MB (Standard) DIMMS (enabled)
Memory at Module 3/Slot 3: 4096 MB (enabled)
  Bank 0 contains 512 MB (Standard) DIMMS (enabled)
  Bank 1 contains 512 MB (Standard) DIMMS (enabled)
  Bank 2 contains 512 MB (Standard) DIMMS (enabled)
  Bank 3 contains 512 MB (Standard) DIMMS (enabled)
  Bank 4 contains 512 MB (Standard) DIMMS (enabled)
  Bank 5 contains 512 MB (Standard) DIMMS (enabled)
  Bank 6 contains 512 MB (Standard) DIMMS (enabled)
  Bank 7 contains 512 MB (Standard) DIMMS (enabled)
Memory at Module 3/Slot 4: 4096 MB (enabled)
  Bank 0 contains 512 MB (Standard) DIMMS (enabled)
  Bank 1 contains 512 MB (Standard) DIMMS (enabled)
  Bank 2 contains 512 MB (Standard) DIMMS (enabled)
  Bank 3 contains 512 MB (Standard) DIMMS (enabled)
  Bank 4 contains 512 MB (Standard) DIMMS (enabled)
  Bank 5 contains 512 MB (Standard) DIMMS (enabled)
  Bank 6 contains 512 MB (Standard) DIMMS (enabled)
  Bank 7 contains 512 MB (Standard) DIMMS (enabled)
ROUTER in Module 3/Slot 2: Revision 2: Active Ports [4,5,6] (enabled)
ROUTER in Module 3/Slot 4: Revision 2: Active Ports [4,5,6] (enabled)
Integral SCSI controller 13: Version Fibre Channel AIC-1160, revision 2
  Disk drive: unit 0 on SCSI controller 13 (unit 0) (XVM Local Disk) (primary path)
  Disk drive: unit 1 on SCSI controller 13 (unit 1) (XVM Local Disk) (primary path)
  Disk drive: unit 2 on SCSI controller 13 (unit 2) (XVM Local Disk) (primary path)
  Disk drive: unit 3 on SCSI controller 13 (unit 3) (XVM Local Disk) (primary path)
  Disk drive: unit 4 on SCSI controller 13 (unit 4) (XVM Local Disk) (primary path)
  Disk drive: unit 5 on SCSI controller 13 (unit 5) (XVM Local Disk) (primary path)
  Disk drive: unit 6 on SCSI controller 13 (unit 6) (XVM Local Disk) (primary path)
  Unknown type 13: unit 13 on SCSI controller 13
Integral SCSI controller 10: Version QL1040B (rev. 2), differential
Integral SCSI controller 11: Version QL1040B (rev. 2), differential
Integral SCSI controller 9: Version QL1040B (rev. 2), differential
Integral SCSI controller 12: Version QL1040B (rev. 2), differential
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
  Disk drive: unit 3 on SCSI controller 0 (unit 3)
  Disk drive: unit 4 on SCSI controller 0 (unit 4)
  Disk drive: unit 5 on SCSI controller 0 (unit 5)
Integral SCSI controller 15: Version Fibre Channel QL2200A, 33 MHz PCI
Integral SCSI controller 14: Version Fibre Channel AIC-1160, revision 2
  Disk drive: unit 16 on SCSI controller 14 (unit 16) (XVM Local Disk) (primary path)
  Disk drive: unit 17 on SCSI controller 14 (unit 17) (XVM Local Disk) (primary path)
  Disk drive: unit 18 on SCSI controller 14 (unit 18) (XVM Local Disk) (primary path)
  Disk drive: unit 19 on SCSI controller 14 (unit 19) (XVM Local Disk) (primary path)
  Disk drive: unit 20 on SCSI controller 14 (unit 20) (XVM Local Disk) (primary path)
  Disk drive: unit 21 on SCSI controller 14 (unit 21) (XVM Local Disk) (primary path)
  Disk drive: unit 22 on SCSI controller 14 (unit 22) (XVM Local Disk) (primary path)
  Unknown type 13: unit 29 on SCSI controller 14
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3 parallel port: plp1
Graphics board: SI
Gigabit Ethernet: eg1, module 3, PCI slot 0, firmware version 12.4.10
Integral Fast Ethernet: ef0, version 1, module 3, slot io1, pci 2
Iris Audio Processor: version RAD revision 7.0, number 1
Origin PCI XIO board, module 3 slot 2: Revision 3
Origin MSCSI board, module 3 slot 8: Revision 3
Origin FIBRE CHANNEL board, module 3 slot 7: Revision 4
Origin BASEIO board, module 3 slot 1: Revision 3
  PCI Adapter ID (vendor 0x10a9, device 0x0009) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x2200) PCI slot 1
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2
  PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3
  PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 6
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 7
  PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 0
  PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 2
DIVO Video: controller 0 unit 0: Input, Output
IOC3/IOC4 external interrupts: 1
HUB in Module 3/Slot 1: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 3/Slot 2: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 3/Slot 3: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 3/Slot 4: Revision 5 Speed 100.00 Mhz (enabled)
IP27prom in Module 3/Slot n1: Revision 6.156
IP27prom in Module 3/Slot n2: Revision 6.156
IP27prom in Module 3/Slot n3: Revision 6.156
IP27prom in Module 3/Slot n4: Revision 6.156
IO6prom on Global Master Baseio in Module 3/Slot io1: Revision 6.119
« Letzte Änderung: 05. Juli 2009, 17:25:02 von Pinky »

mood-indigo.org - Das unabhängige Silicon Graphics User Forum


grauling

  • Gast
ich würde die io6g und die Grafik nehmen.
(die 2000€ sind m.E. unrealistisch, in Einzelteilen kaum mehr als 500€)
« Letzte Änderung: 18. Juli 2009, 13:42:56 von grauling »

Pinky

  • Gast
ich würde die io6g und die Grafik nehmen.

Einzelteile gebe ich keine her (ausser der DIVO), ganz oder gar nicht (Rest kriegt man nicht weg und wegschmeissen ist mir dann doch zu schade).

Zitat
(die 2000€ sind m.E. unrealistisch, in Einzelteilen kaum mehr als 500€)
Schade, Versuch war's wert ;)