Bis hierher besten Dank Euch beiden, funzt aber immer noch nicht, nur, dass ich zu dem weissen Balken jetzt lauter feine gruene Querbalken erhalten habe. Was habe ich getan?
Nach etwa 1 1/2 Stunde roedeln via "Run Diagnostics" ohne Fehlerausgabe (alles fein, ging ja auch vorher) erneut an die Sache:
Zunaechst die von Christoph vorgeschlagene Methode, um zum Prompt zu gelangen.
1. Schritt
/usr/gfx/gfxinfo
Ausgabe:
Graphics board 0 is "GR2" graphics.
Unmanaged 1280x1024
8GEs, 2 REs, 24 bitplanes, 4 auxplanes, 4 cidplanes, Z-buffer
G2 revision 6, VB 2.0
HQ 2.1 rev A, GE7 rev B, RE3 rev unknown, VC1 rev B, MC rev B
19" monitor
2. Schritt
/usr/gfx/setmon 1280x1024_60
Ausgabe:
Make new formar the power-on default? (n)
Eingabe:
y
Ausgabe:
setmon: format "/usr/gfx/ucode/GR2/vof/1280x1024_60.u" presumed invalid
3. Schritt
/usr/gfx/stopgfx
Ausgabe:
UX:killall: ERROR: Cannot stat /proc/pinfo
UX:killall: REASON: No such file or directory
4. Schritt
cd /proc
ls
ls
mkdir pinfo
/usr/gfx/stopgfx
Ausgabe:
UX:killall: ERROR: /proc/pinfo is not mounted
mount /proc/pinfo
Ausgabe:
mount: /proc/pinfo not found in /etc/fstab
5. Schritt Versuche, fstab zu editieren
sed /etc/fstab
Ausgabe:
Unregognized command: /etc/fstab
Bis dahin. Vielleicht habe ich das command "sed" falsch verstanden, ich dachte, das sei ein Editor? vi hilft mir allerdings auch nicht weiter:
vi /etc/fstab
Ausgabe:
I do not know what kind of terminal you are on - all I have is "unknown".
"/etc/fstab" 2 lines, 81 characters
/dev/root / xfs rw,raw=/dev/rroot 0 0
also mit :q! wieder raus.
Da bin ich dann am Ende meiner Weisheit.
Bei einem Systemcheck gab mir aber der Rechner eine andere Graphikkarte aus:
System IP22
Processor: 150 MHz R4400, with FPU
Primary I-cache size: 16 Kbytes
Primary D-cache size: 1024 Kbytes
Memory size: 96 Mbytes
Graphics: GU1 Extreme
SCSI Disk: scsi(0)disk(1)
SCSI CDROM: scsi(0)cdrom(3)
Vielleicht hat das ja damit etwas zu tun???
Bitte um Hilfe. Udo