Hardware > Biete
Onyx2 abzugeben
(1/1)
guefz:
Hallo,
ich will mich von meiner Onyx2 im Deskside-Gehäuse trennen. Zu dem Gerät gehört auch noch ein GDM-90W11 Monitor. Beides ist gegen Selbstabholung hier in Köln zu verschenken. Die Daten sind wie folgt (gerade frisch aus der Maschine geholt):
hinv:
--- Code: ---Processor 0: 300 MHZ IP27
CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 2.3
Processor 1: 300 MHZ IP27
CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 2.3
Processor 2: 400 MHZ IP27
CPU: MIPS R12000 Processor Chip Revision: 3.5
FPU: MIPS R12010 Floating Point Chip Revision: 3.5
Processor 3: 400 MHZ IP27
CPU: MIPS R12000 Processor Chip Revision: 3.5
FPU: MIPS R12010 Floating Point Chip Revision: 3.5
CPU 0 at Module 1/Slot 2/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
CPU 1 at Module 1/Slot 2/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
CPU 2 at Module 1/Slot 1/Slice A: 400 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0x1a
CPU 3 at Module 1/Slot 1/Slice B: 400 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0x1a
Main memory size: 3072 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 8 Mbytes
Memory at Module 1/Slot 82: 1536 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Bank 1 contains 512 MB (Standard) DIMMS (enabled)
Bank 2 contains 512 MB (Standard) DIMMS (enabled)
Memory at Module 1/Slot 81: 1536 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Bank 1 contains 512 MB (Standard) DIMMS (enabled)
Bank 2 contains 512 MB (Standard) DIMMS (enabled)
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive: unit 2 on SCSI controller 0 (unit 2)
Disk drive: unit 3 on SCSI controller 0 (unit 3)
Disk drive: unit 4 on SCSI controller 0 (unit 4)
Disk drive: unit 5 on SCSI controller 0 (unit 5)
CDROM: unit 6 on SCSI controller 0
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3 parallel port: plp1
Graphics board: InfiniteReality2E
HIPPI-Serial adapter: unit 0, in module 1 I/O slot 6
Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2
Iris Audio Processor: version RAD revision 7.0, number 1
Origin BASEIO board, module 1 slot 1: Revision 4
PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 0
PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 0
PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 2
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 6
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 7
DIVO Video: controller 0 unit 0: Input, Output
IOC3/IOC4 external interrupts: 1
HUB in Module 1/Slot 2: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 1/Slot 1: Revision 6 Speed 100.00 Mhz (enabled)
IP27prom in Module 1/Slot n2: Revision 6.156
IP27prom in Module 1/Slot n1: Revision 6.94
IO6prom on Global Master Baseio in Module 1/Slot io2: Revision 6.156
--- Ende Code ---
gfxinfo:
--- Code: ---Graphics board 0 is "KONAL" graphics.
Managed (":0.0") 2560x1024
Display has 2 channels
4 GEs (of 4), occmask = 0x0f
4MB external BEF ram, 32bit path
1 RM9 board (of 1) 1/0/0/0
Texture Memory: 64MB/-/-/-
Small pixel depth
32K cmap
brd: 80f61806 3020c06/-/-/- f9391002
ge: 0 14832057 24731057 14231057
rm0: 15032057 15431057
4631057 2/2/2/2
4d31057 2/2/2/2/2/2/2/2
4938057 5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5
dg: 05532057
5838057 1/1/1/1
5631057 1/1
GE: NIC #: 0000.0031.cd4f (family: 0b)
Serial #: HLK018
Part #: 030-1398-001
KT: No NIC serial number available.
RM0: NIC #: 0000.003b.db18 (family: 0b)
Serial #: KAL179
Part #: 030-1402-001
TM0: NIC #: 0000.003b.b572 (family: 0b)
Serial #: KAR916
Part #: 030-1053-001
RM1: No NIC serial number available.
TM1: No NIC serial number available.
RM2: No NIC serial number available.
TM2: No NIC serial number available.
RM3: No NIC serial number available.
TM3: No NIC serial number available.
BP: No NIC serial number available.
DG: NIC #: 0000.001e.2f80 (family: 0b)
Serial #: HJX119
Part #: 030-1055-001
DGOPT:No NIC serial number available.
Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False
Channel 0:
Origin = (0,0)
Video Output: 1280 pixels, 1024 lines, 72.00Hz (1280x1024_72.vfo)
Video Format Flags: (none)
Sync Output(s):
Composite sync on Green
Composite TTL sync on Aux 0
Using Gamma Map 0
Channel 1:
Origin = (1280,0)
Video Output: 1280 pixels, 1024 lines, 72.00Hz (1280x1024_72.vfo)
Video Format Flags: (none)
Sync Output(s):
Composite sync on Green
Composite TTL sync on Aux 0
Using Gamma Map 0
--- Ende Code ---
bis denn
Günter
jmc:
Hi Guenter! Ich habe dir eine PM geschickt! :)
lg
foetz:
spitzenangebot. haette ich nur mehr platz aber gut zu sehen dass sie in gute haende kommt. viel spass damit jmc :)
guefz:
Die Maschine ist jetzt weg, der Faden kann ins Archiv verschoben werden.
Günter
Navigation
[0] Themen-Index
Zur normalen Ansicht wechseln