Hardware > Archiv

'Halbe' Origin 2000 mit so ziemlich allem, was reingeht, Fibre Channel Array

(1/1)

Pinky:
Halbe Rack Origin (meldet sich als 'Onyx 2 MXI') mit
- 8 300Mhz R12Ks
- 16GB RAM
- Platten: 2x17GB, 1x9GB 2x73GB
- 2 Rack Router Boards
- DIVO (ohne DV Option)
- XIO 2x FC Karte, mit DB9 FC Ports und 2 MIAs auf Glasfaser (SC)
- XIO SCSI Karte mit einem Kabel, also 1 'normaler' und ein diff. SCSI Anschluss
- PCI Shoehorn
- PCI GB Ethernet
- PCI FC Karte QLogic QL2200 mit einem SC Port
- IO6G von einer Onyx (also Keyboard, Mouse, Audio, ...)
- SI Grafikkarte mit Adapter auf VGA
- Irix 6.5.24
- MipsPro 7.4.4m (letzte Version) C und F90 Compiler installiert, ohne Lizenz

Ahja, laeuft mit ganz normalen 240V.

Ausserdem gibt's das 'Origin 200 and Onyx2 Deskside and Rackmount Installation Instructions' (108-0155-004) Manual dazu - das ist _nicht_ auf Techpubs erhaeltlich, das verwendeten die SGI Techniker.

Kann auch noch ein CD-Laufwerk in externen Gehaeuse dazugeben.

Dazu passendes FC Array - Sun A5000 mit 14 73GB (1TB)  Platten mit 10K RPM, 4 SC Fibre Channel GBICs an der Backplane (ist gesplittet, also 7 Platten haengen an je 2 Ausgaengen)

Abholung in Lassnitzhoehe (15km von Graz entfernt) oder ich stelle die Origin selbst zu, dann aber nicht weiter als 1 Autostunde von Graz entfernt.

Preis 2000 EUR fuer die Origin, 750 fuer das Array 2500 EUR fuer alles.

Hinv (hinv -mv):

--- Code: ---Location: /hw/module/3/slot/n1/node
        MODULEID Board: barcode K0018194   part              rev   
     IP31PIMM8MB Board: barcode JHL512     part 030-1401-002 rev  B
            IP31 Board: barcode JEF182     part 030-1255-003 rev  D
       8P12_MPLN Board: barcode FXZ928     part 030-0762-006 rev  K
Location: /hw/module/3/slot/n2/node
     IP31PIMM8MB Board: barcode JHC636     part 030-1401-002 rev  B
            IP31 Board: barcode JEK535     part 030-1255-003 rev  D
Location: /hw/module/3/slot/n3/node
     IP31PIMM8MB Board: barcode JED476     part 030-1401-002 rev  C
            IP31 Board: barcode JEE071     part 030-1255-003 rev  D
Location: /hw/module/3/slot/n4/node
            IP31 Board: barcode JHL400     part 030-1255-003 rev  D
     IP31PIMM8MB Board: barcode JEF438     part 030-1401-002 rev  B
Location: /hw/module/3/slot/r1/router
      ROUTER_IR1 Board: barcode HMA666     part 030-0841-003 rev  B
Location: /hw/module/3/slot/r2/router
      ROUTER_IR1 Board: barcode GBG648     part 030-0841-002 rev  H
Location: /hw/module/3/slot/io4/mgras
            GM10 Board: barcode ENF828     part 030-0938-003 rev  Y
Location: /hw/module/3/slot/io2/pci_xio
         PCI_XIO Board: barcode GBH935     part 030-1062-002 rev  D
Location: /hw/module/3/slot/io8/mscsi
           MSCSI Board: barcode FTH057     part 030-1243-001 rev  G
Location: /hw/module/3/slot/io7/fibre_channel
   FIBRE_CHANNEL Board: barcode JKY134     part 030-0927-003 rev  E
Location: /hw/module/3/slot/io1/baseio
          BASEIO Board: barcode GAM473     part 030-0734-002 rev  K
             MIO Board: barcode FZY507     part 030-0880-003 rev  F
Location: /hw/module/3/slot/io3/divo
            DIVO Board: barcode DPM493     part 030-1046-002 rev  G
8 300 MHZ IP27 Processors
CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 2.3
CPU 0 at Module 3/Slot 1/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
CPU 1 at Module 3/Slot 1/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
CPU 2 at Module 3/Slot 2/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
CPU 3 at Module 3/Slot 2/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
CPU 4 at Module 3/Slot 3/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
CPU 5 at Module 3/Slot 3/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
CPU 6 at Module 3/Slot 4/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
CPU 7 at Module 3/Slot 4/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
Main memory size: 16384 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 8 Mbytes
Memory at Module 3/Slot 1: 4096 MB (enabled)
  Bank 0 contains 512 MB (Standard) DIMMS (enabled)
  Bank 1 contains 512 MB (Standard) DIMMS (enabled)
  Bank 2 contains 512 MB (Standard) DIMMS (enabled)
  Bank 3 contains 512 MB (Standard) DIMMS (enabled)
  Bank 4 contains 512 MB (Standard) DIMMS (enabled)
  Bank 5 contains 512 MB (Standard) DIMMS (enabled)
  Bank 6 contains 512 MB (Standard) DIMMS (enabled)
  Bank 7 contains 512 MB (Standard) DIMMS (enabled)
Memory at Module 3/Slot 2: 4096 MB (enabled)
  Bank 0 contains 512 MB (Standard) DIMMS (enabled)
  Bank 1 contains 512 MB (Standard) DIMMS (enabled)
  Bank 2 contains 512 MB (Standard) DIMMS (enabled)
  Bank 3 contains 512 MB (Standard) DIMMS (enabled)
  Bank 4 contains 512 MB (Standard) DIMMS (enabled)
  Bank 5 contains 512 MB (Standard) DIMMS (enabled)
  Bank 6 contains 512 MB (Standard) DIMMS (enabled)
  Bank 7 contains 512 MB (Standard) DIMMS (enabled)
Memory at Module 3/Slot 3: 4096 MB (enabled)
  Bank 0 contains 512 MB (Standard) DIMMS (enabled)
  Bank 1 contains 512 MB (Standard) DIMMS (enabled)
  Bank 2 contains 512 MB (Standard) DIMMS (enabled)
  Bank 3 contains 512 MB (Standard) DIMMS (enabled)
  Bank 4 contains 512 MB (Standard) DIMMS (enabled)
  Bank 5 contains 512 MB (Standard) DIMMS (enabled)
  Bank 6 contains 512 MB (Standard) DIMMS (enabled)
  Bank 7 contains 512 MB (Standard) DIMMS (enabled)
Memory at Module 3/Slot 4: 4096 MB (enabled)
  Bank 0 contains 512 MB (Standard) DIMMS (enabled)
  Bank 1 contains 512 MB (Standard) DIMMS (enabled)
  Bank 2 contains 512 MB (Standard) DIMMS (enabled)
  Bank 3 contains 512 MB (Standard) DIMMS (enabled)
  Bank 4 contains 512 MB (Standard) DIMMS (enabled)
  Bank 5 contains 512 MB (Standard) DIMMS (enabled)
  Bank 6 contains 512 MB (Standard) DIMMS (enabled)
  Bank 7 contains 512 MB (Standard) DIMMS (enabled)
ROUTER in Module 3/Slot 2: Revision 2: Active Ports [4,5,6] (enabled)
ROUTER in Module 3/Slot 4: Revision 2: Active Ports [4,5,6] (enabled)
Integral SCSI controller 13: Version Fibre Channel AIC-1160, revision 2
  Disk drive: unit 0 on SCSI controller 13 (unit 0) (XVM Local Disk) (primary path)
  Disk drive: unit 1 on SCSI controller 13 (unit 1) (XVM Local Disk) (primary path)
  Disk drive: unit 2 on SCSI controller 13 (unit 2) (XVM Local Disk) (primary path)
  Disk drive: unit 3 on SCSI controller 13 (unit 3) (XVM Local Disk) (primary path)
  Disk drive: unit 4 on SCSI controller 13 (unit 4) (XVM Local Disk) (primary path)
  Disk drive: unit 5 on SCSI controller 13 (unit 5) (XVM Local Disk) (primary path)
  Disk drive: unit 6 on SCSI controller 13 (unit 6) (XVM Local Disk) (primary path)
  Unknown type 13: unit 13 on SCSI controller 13
Integral SCSI controller 10: Version QL1040B (rev. 2), differential
Integral SCSI controller 11: Version QL1040B (rev. 2), differential
Integral SCSI controller 9: Version QL1040B (rev. 2), differential
Integral SCSI controller 12: Version QL1040B (rev. 2), differential
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
  Disk drive: unit 3 on SCSI controller 0 (unit 3)
  Disk drive: unit 4 on SCSI controller 0 (unit 4)
  Disk drive: unit 5 on SCSI controller 0 (unit 5)
Integral SCSI controller 15: Version Fibre Channel QL2200A, 33 MHz PCI
Integral SCSI controller 14: Version Fibre Channel AIC-1160, revision 2
  Disk drive: unit 16 on SCSI controller 14 (unit 16) (XVM Local Disk) (primary path)
  Disk drive: unit 17 on SCSI controller 14 (unit 17) (XVM Local Disk) (primary path)
  Disk drive: unit 18 on SCSI controller 14 (unit 18) (XVM Local Disk) (primary path)
  Disk drive: unit 19 on SCSI controller 14 (unit 19) (XVM Local Disk) (primary path)
  Disk drive: unit 20 on SCSI controller 14 (unit 20) (XVM Local Disk) (primary path)
  Disk drive: unit 21 on SCSI controller 14 (unit 21) (XVM Local Disk) (primary path)
  Disk drive: unit 22 on SCSI controller 14 (unit 22) (XVM Local Disk) (primary path)
  Unknown type 13: unit 29 on SCSI controller 14
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3 parallel port: plp1
Graphics board: SI
Gigabit Ethernet: eg1, module 3, PCI slot 0, firmware version 12.4.10
Integral Fast Ethernet: ef0, version 1, module 3, slot io1, pci 2
Iris Audio Processor: version RAD revision 7.0, number 1
Origin PCI XIO board, module 3 slot 2: Revision 3
Origin MSCSI board, module 3 slot 8: Revision 3
Origin FIBRE CHANNEL board, module 3 slot 7: Revision 4
Origin BASEIO board, module 3 slot 1: Revision 3
  PCI Adapter ID (vendor 0x10a9, device 0x0009) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x2200) PCI slot 1
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2
  PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3
  PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 6
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 7
  PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 0
  PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 2
DIVO Video: controller 0 unit 0: Input, Output
IOC3/IOC4 external interrupts: 1
HUB in Module 3/Slot 1: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 3/Slot 2: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 3/Slot 3: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 3/Slot 4: Revision 5 Speed 100.00 Mhz (enabled)
IP27prom in Module 3/Slot n1: Revision 6.156
IP27prom in Module 3/Slot n2: Revision 6.156
IP27prom in Module 3/Slot n3: Revision 6.156
IP27prom in Module 3/Slot n4: Revision 6.156
IO6prom on Global Master Baseio in Module 3/Slot io1: Revision 6.119
--- Ende Code ---

grauling:
ich würde die io6g und die Grafik nehmen.
(die 2000€ sind m.E. unrealistisch, in Einzelteilen kaum mehr als 500€)

Pinky:

--- Zitat von: grauling am 18. Juli 2009, 12:30:32 ---ich würde die io6g und die Grafik nehmen.
--- Ende Zitat ---

Einzelteile gebe ich keine her (ausser der DIVO), ganz oder gar nicht (Rest kriegt man nicht weg und wegschmeissen ist mir dann doch zu schade).


--- Zitat ---(die 2000€ sind m.E. unrealistisch, in Einzelteilen kaum mehr als 500€)

--- Ende Zitat ---
Schade, Versuch war's wert ;)

Navigation

[0] Themen-Index