Probleme mit Fuel

Hardware > Hardware Probleme

Probleme mit Fuel

(1/2) > >>

ravemaster2000:
So habe ne schöne Fuel bei Ebay ersteigert. Alles bestens dachte ich. Auspacken Einschalten Geht. Geht ebend nicht. Die Lightbar blinkt die ganze Zeit weiss vor sich hin und es kommt kein Bild.
Das eine Fuel länger zum Booten braucht weiss ich aber keine 10 min. Über die L1 Console auf dem Mainboard habe ich schonmal reingeschaut. Lüfterdrehzahl etc. werde aber aus den Werten nicht richtig schlau. Am seriellen Anschluss Terminal mit Nullmodemkabel dran. Aber auch da kommen nur ein paar xxxxCCCCCxxxxx xxxxCCC. Bin am Ende meiner Kunst da es meine erste Fuel ist. Ich wäre echt dankbar für ein bisschen Hilfe.

Danke schonmal der Rave

jobeh:
Oliver,

ich sagte du sollst den Ouput von dem abgefragten Environment hier posten damit die Leute vergleichen koennen bzw. sagen koenen was bei dir fehlt.

Bezueglich der Hyroglyphen an der Console.... kann es sein das hier andere Terminalsettings gefragt sind als am L1 Controller?

Gruss
Joerg

ravemaster2000:
Jepp Jörg hat mal wieder recht. Hier die Daten der seriellen Console

IP35 PROM SGI Version 6.210 built 02:33:51 PM Aug 26, 2004
Running in DDR mode
Testing/Initializing memory ............... DONE
Copying PROM code to memory ............... DONE
Discovering local IO ...................... DONE
Discovering NUMAlink connectivity .........
Local hub NUMAlink is down.
*** Local network link down
DONE
Found 1 objects (1 hubs, 0 routers) in 30360 usec
Waiting for peers to complete discovery.... DONE
No other nodes present; becoming globa
Global master is /hw/rack/001/bay/01
Intializing any CPUless nodes.............. DONE
Checking partitioning information ......... DONE
No other nodes present; becoming partition master
Loading BASEIO prom ....................... DONE

BASEIO PROM Monitor SGI Version 6.210 built 02:30:38 PM Aug 26, 2004 (BE64)
1 CPUs on 1 nodes found.
Automatic update of PROM environment disabled

PS/2 Keyboard & Mouse diagnostics
Found mouse on port 0
Found keyboard on port 1
PS/2 Keyboard & Mouse diagnostics passed

Graphics diagnostics

Odyssey board #0 found on nasid 0
Running Odyssey xtalk sanity diag...
Board version 1 - Buzz revision 2B
On board sdram size: 32 Mb
Cas latency: CAS 3
4 banks by sdram module
Running Odyssey Buzz registers diag...
Device passed diagnostics

Installing PROM Device drivers ............
Base I/O Ethernet set to /dev/ethernet/ef0
Installing Graphics Console...
graphics install: searching for pipe 0

Walking SCSI Adapter 0, (pci id 1)
1+ Device Vendor Product: SGI IC35L036UWDY10-0
2- 3- 4- 5- 6- 7- 8- 9- 10- 11- 12- 13- 14- 15- = 1 device(s)

Walking SCSI Adapter 1, (pci id 1)
1- 2- 3- 4- 5- 6- 7- 8- 9- 10- 11- 12- 13- 14- 15- = 0 device(s)

Initializing PROM Device drivers .......... DONE

A 000: *** General Exception on node 0
A 000: *** EPC: 0xc00000001fc47e58 (0xc00000001fc47e58)
A 000: *** Press ENTER to continue.

jobeh:
Wo ist die Ausgabe vom Environment monitoring?

Gruss
Joerg

ravemaster2000:
env
ERROR: command not found.
001a01-L1>env
Environmental monitoring is enabled and running.

Description State Warning Limits Fault Limits Current
-------------- ---------- ----------------- ----------------- -------
12V Enabled 10% 10.80/ 13.20 20% 9.60/ 14.40 12.12
12V IO Enabled 10% 10.80/ 13.20 20% 9.60/ 14.40 12.12
5V Enabled 10% 4.50/ 5.50 20% 4.00/ 6.00 5.10
3.3V Enabled 10% 2.97/ 3.63 20% 2.64/ 3.
2.5V Enabled 10% 2.25/ 2.75 20% 2.00/ 3.00 2.46
1.5V Enabled 10% 1.35/ 1.65 20% 1.20/ 1.80 1.47
5V aux Enabled 10% 4.50/ 5.50 20% 4.00/ 6.00 5.10
3.3V aux Enabled 10% 2.97/ 3.63 20% 2.64/ 3.96 3.29
PIMM0 12V bias Enabled 10% 10.80/ 13.20 20% 9.60/ 14.40 12.06
Fuel SRAM Enabled 10% 2.25/ 2.75 20% 2.00/ 3.00 2.52
Fuel CPU Enabled 10% 1.44/ 1.76 20% 1.28/ 1.92 1.61
PIMM0 1.5V Enabled 10% 1.35/ 1.65 20% 1.20/ 1.80 1.49
PIMM0 3.3V aux Enabled 10% 2.97/ 3.63 20% 2.64/ 3.96 3.29
PIMM0 5V aux Enabled 10% 4.50/ 5.50 20% 4.00/ 6.00 5.10
XIO 12V bias Enabled 10% 10.80/ 13.20 20% 9.60/ 14.40 12.06
XIO 5V Enabled 10% 4.50/ 5.50 20% 4.00/ 6.00 5.07
XIO 2.5V Enabled 10% 2.25/ 2.75 20% 2.00/ 3.00 2.46
XIO 3.3V aux Enabled 10% 2.97/ 3.63 20% 2.64/ 3.96 3.29

Description State Warning RPM Current RPM
-------------- ---------- ----------- -----------
FAN 0 EXHAUST Enabled 920 1152
FAN 1 HD Enabled 1560 2290
FAN 2 PCI Enabled 1120 1618
FAN 3 XIO 1 Enabled 1600 2229
FAN 4 XIO 2 Enabled 1600 2052
FAN 5 PS Enabled 1600 1968

Advisory Critical Fault Current
Description State Temp Temp Temp Temp
-------------- ---------- --------- --------- --------- ---------
NODE 0 Enabled 60C/140F 65C/149F 70C/158F 24C/ 75F
NODE 1 Enabled 60C/140F 65C/149F 70C/158F 23C/ 73F
NODE 2 Enabled 60C/140F 65C/149F 70C/158F 20C/ 68F
PIMM Enabled 60C/140F 65C/149F 70C/158F 26C/ 78F
ODYSSEY Enabled 60C/140F 65C/149F 70C/158F 19C/ 66F
BEDROCK Enabled 70C/158F 75C/167F 80C/176F 24C/ 75F

001a01-L1>env
Environmental monitoring is enabled and running.

Description State Warning Limits Fault Limits Current
-------------- ---------- ----------------- ----------------- -------
12V Enabled 10% 10.80/ 13.20 20% 9.60/ 14.40 12.12
12V IO Enabled 10% 10.80/ 13.20 20% 9.60/ 14.40 12.12
5V Enabled 10% 4.50/ 5.50 20% 4.00/ 6.00 5.10
3.3V Enabled 10% 2.97/ 3.63 20% 2.64/ 3.96 3.34
2.5V Enabled 10% 2.25/ 2.75 20% 2.00/ 3.00 2.46
1.5V Enabled 10% 1.35/ 1.65 20% 1.20/ 1.80 1.47
5V aux Enabled 10% 4.50/ 5.50 20% 4.00/ 6.00 5.10
3.3V aux Enabled 10% 2.97/ 3.63 20% 2.64/ 3.96 3.29
PIMM0 12V bias Enabled 10% 10.80/ 13.20 20% 9.60/ 14.40 12.06
Fuel SRAM Enabled 10% 2.25/ 2.75 20% 2.00/ 3.00 2.52
Fuel CPU Enabled 10% 1.44/ 1.76 20% 1.28/ 1.92 1.61
PIMM0 1.5V Enabled 10% 1.35/ 1.65 20% 1.20/ 1.80 1.49
PIMM0 3.3V aux Enabled 10% 2.97/ 3.63 20% 2.64/ 3.96 3.27
PIMM0 5V aux Enabled 10% 4.50/ 5.50 20% 4.00/ 6.00 5.10
XIO 12V bias Enabled 10% 10.80/ 13.20 20% 9.60/ 14.40 12.06
XIO 5V Enabled 10% 4.50/ 5.50 20% 4.00/ 6.00 5.07
XIO 2.5V Enabled 10% 2.25/ 2.75 20% 2.00/ 3.00 2.46
XIO 3.3V aux Enabled 10% 2.97/ 3.63 20% 2.64/ 3.96 3.29

Description State Warning RPM Current RPM
-------------- ---------- ----------- -----------
FAN 0 EXHAUST Enabled 920 1152
FAN 1 HD Enabled 1560 2305
FAN 2 PCI Enabled 1120 1618
FAN 3 XIO 1 Enabled 1600 2229
FAN 4 XIO 2 Enabled 1600 2052
FAN 5 PS Enabled 1600 1980

Advisory Critical Fault Current
Description State Temp Temp Temp Temp
-------------- ---------- --------- --------- --------- ---------
NODE 0 Enabled 60C/140F 65C/149F 70C/158F 25C/ 77F
NODE 1 Enabled 60C/140F 65C/149F 70C/158F 24C/ 75F
NODE 2 Enabled 60C/140F 65C/149F 70C/158F 20C/ 68F
PIMM Enabled 60C/140F 65C/149F 70C/158F 30C/ 86F
ODYSSEY Enabled 60C/140F 65C/149F 70C/158F 19C/ 66F
BEDROCK Enabled 70C/158F 75C/167F 80C/176F 26C/ 78F

Navigation

[0] Themen-Index

[#] Nächste Seite

Zur normalen Ansicht wechseln