Hardware > Hardware Probleme
was ist das?
jobeh:
Teste ersteinmal nur mit einem Nodeboard. Die RAM Baenke 1 und 3 sind zu bestuecken. Schau mal auf http://gallery.irixworld.net/v/origin2000_2/imag0011.jpg.html da kann man sehen das es von Rechts nach Links geht.
Evtl. kann es helfen die Logs zuloeschen in dem man im PROM
--- Code: ---pod
go cac
clearalllogs
initalllogs
reset
--- Ende Code ---
angibt.
grauling:
schön, so sieht es bei mir auch aus... ;D
leider sehe ich da nur einen stapel nodeboards.......
habe jedes board mit 4g bestückt, gibt es da irgendwelche beschränkungen?
grauling:
perfekt, das war die lösung, nix im arsch... ;D ;D ;D
jobeh:
--- Zitat von: grauling am 21. Oktober 2006, 23:48:26 ---schön, so sieht es bei mir auch aus... ;D
leider sehe ich da nur einen stapel nodeboards.......
habe jedes board mit 4g bestückt, gibt es da irgendwelche beschränkungen?
--- Ende Zitat ---
Du hattest gefragt welche Baenke bestueckt werden muessen und das kann man auf dem Foto erkennen. Mal davon abgesehen das auf vielen Boards auf der Mittelstrebe kennzeichnungen sind.
Bei der max. Bestueckung von 4GB eruebrigt sich das allerdings.
gruss
Joerg
grauling:
mal sehen, ob ich noch ein modul drankriege....
>> hinv -v
IP27 Node Board, Module 1, Slot n1
ASIC HUB Rev 5, 100 MHz, (nasid 0)
Processor A: 250 MHz R10000 Rev 3.4
Secondary Cache 4MB 250MHz Tap 0x9 , (cpu 0)
R10010FPC Rev 3.4
Processor B: 250 MHz R10000 Rev 3.4
Secondary Cache 4MB 250MHz Tap 0x9 , (cpu 1)
R10010FPC Rev 3.4
Memory on board, 4096 MBytes (Standard)
Bank 0, 512 MBytes (Standard) <-- (Software Bank 0)
Bank 1, 512 MBytes (Standard)
Bank 2, 512 MBytes (Standard)
Bank 3, 512 MBytes (Standard)
Bank 4, 512 MBytes (Standard)
Bank 5, 512 MBytes (Standard)
Bank 6, 512 MBytes (Standard)
Bank 7, 512 MBytes (Standard)
IP27 Node Board, Module 1, Slot n2
ASIC HUB Rev 5, 100 MHz, (nasid 1)
Processor A: 250 MHz R10000 Rev 3.4
Secondary Cache 4MB 250MHz Tap 0x9 , (cpu 2)
R10010FPC Rev 3.4
Processor B: 250 MHz R10000 Rev 3.4
Secondary Cache 4MB 250M
R10010FPC Rev 3.4
Memory on board, 4096 MBytes (Standard)
Bank 0, 512 MBytes (Standard) <-- (Software Bank 0)
Bank 1, 512 MBytes (Standard)
Bank 2, 512 MBytes (Standard)
Bank 3, 512 MBytes (Standard)
Bank 4, 512 MBytes (Standard)
Bank 5, 512 MBytes (Standard)
Bank 6, 512 MBytes (Standard)
Bank 7, 512 MBytes (Standard)
IP27 Node Board, Module 1, Slot n3
ASIC HUB Rev 5, 100 MHz, (nasid 2)
Processor A: 250 MHz R10000 Rev 3.4
Secondary Cache 4MB 250MHz Tap 0x9 , (cpu 4)
R10010FPC Rev 3.4
Processor B: 250 MHz R10000 Rev 3.4
Secondary Cache 4MB 250MHz Tap 0x9 , (cpu 5)
R10010FPC Rev 3.4
Memory on board, 4096 MBytes (Standard)
Bank 0, 512 MBytes (Standard) <-- (Software Bank 0)
Bank 1, 512 MBytes (Standard)
Bank 2, 512 MBytes (Standard)
Bank 3, 512 MBytes (Standard)
Bank 4, 512 MBytes (Standard)
Bank 5, 512 MBytes (Standard)
Bank 6, 512 MBytes (Standard)
Bank 7, 512 MBytes (Standard)
IP27 Node Board, Module 1, Slot n4
ASIC HUB Rev 5, 100 MHz, (nasid 3)
Processor A: 250 MHz R10000 Rev 3.4
Secondary Cache 4MB 250MHz Tap 0x9 , (cpu 6)
R10010FPC Rev 3.4
Processor B: 250 MHz R10000 Rev 3.4
Secondary Cache 4MB 250MHz Tap 0x9 , (cpu 7)
R10010FPC Rev 3.4
Memory on board, 3584 MBytes (Standard)
Bank 0, 512 MBytes (Standard) <-- (Software Bank 0)
Bank 1, 512 MBytes (Standard)
Bank 2, 512 MBytes (Stand
Bank 3, 512 MBytes (Standard)
Bank 5, 512 MBytes (Standard)
Bank 6, 512 MBytes (Standard)
Bank 7, 512 MBytes (Standard)
BASEIO IO Board, Module 1, Slot io1
ASIC BRIDGE Rev 3, (widget 8)
adapter PCI-SCSI Rev 5, (pci id 0)
peripheral SCSI DISK, ID 1, SGI IBM DCHS09Y
peripheral SCSI DISK, ID 2, SGI IBM DCHS09Y
peripheral SCSI DISK, ID 3, SGI IBM DCHS09Y
peripheral SCSI DISK, ID 4, SGI IBM DCHS09Y
peripheral SCSI CDROM, ID 6, TOSHIBA CD-ROM X
adapter PCI-SCSI Rev 5, (pci id 1)
adapter IOC3 Rev 1, (pci id 2)
controller multi function SuperIO
controller Ethernet Rev 1
FIBRE_CHANNEL IO Board, Module 1, Slot io4
ASIC BRIDGE Rev 4, (widget 11)
adapter Adaptec FiberChannel , (pci id 0)
adapter Adaptec FiberChannel , (pci id 1)
PCI_XIO IO Board, Module 1, Slot io2
ASIC BRIDGE Rev 3, (widget 12)
FIBRE_CHANNEL IO Board, Module 1, Slot io6
ASIC BRIDGE Rev 4, (widget 13)
adapter Adaptec FiberChannel , (pci id 0)
adapter Adaptec FiberChannel , (pci id 1)
MSCSI IO Board, Module 1, Slot io5
ASIC BRIDGE Rev 3, (widget 14)
adapter PCI-SCSI Rev 5, (pci id 0)
adapter PCI-SCSI Rev 5, (pci id 1)
adapter PCI-SCSI Rev 5, (pci id 2)
adapter PCI-SCSI Rev 5, (pci id 3)
FIBRE_CHANNEL IO Board, Module 1, Slot io3
ASIC BRIDGE Rev 4, (widget 15)
adapter Adaptec FiberChannel , (pci id 0)
adapter Adaptec FiberChannel , (pci id 1)
HIPPI_SERIAL IO Board, Module 1, Slot io11
ASIC BRIDGE Rev 3, (widget 8)
adapter ID (Vendor 10a9 Device 2)Rev 1, (pci id 0)
adapter ID (Vendor 10a9 Device 2)Rev 1, (pci id 1)
FIBRE_CHANNEL IO Board, Module 1, Slot io8
ASIC BRIDGE Rev 3, (widget 11)
adapter Adaptec FiberChannel , (pci id 0)
adapter Adaptec FiberChannel , (pci id 1)
FIBRE_CHANNEL IO Board, Module 1, Slot io10
ASIC BRIDGE Rev 4, (widget 12)
adapter Adaptec FiberChannel , (pci id 0)
adapter Adaptec FiberChannel , (pci id 1)
XTALK_PCI IO Board, Module 1, Slot io12
ASIC BRIDGE Rev 4, (widget 13)
adapter ID (Vendor 10a9 Device 9), (pci id 1)
FIBRE_CHANNEL IO Board, Module 1, Slot io7
ASIC BRIDGE Rev 4, (widget 14)
adapter Adaptec FiberChannel , (pci id 0)
adapter Adaptec FiberChannel , (pci id 1)
FIBRE-CHANNEL IO Board, Module 1, Slot io9
ASIC BRIDGE Rev 3, (widget 15)
adapter Adaptec FiberChannel , (pci id 0)
adapter Adaptec FiberChannel , (pci id 1)
ASIC ROUTER , Module 1, Slot r1 (nasid 1)
ASIC ROUTER , Module 1, Slot r2 (nasid 3)
MIDPLANE, Module 1 Frequency 390 MHz
ASIC XBOW Rev 2, on midplane of Module 1
MIDPLANE, Module 1 Frequency 390 MHz
ASIC XBOW Rev 2, on midplane of Module 1
>>
Navigation
[0] Themen-Index
[#] Nächste Seite
[*] Vorherige Sete
Zur normalen Ansicht wechseln